Dear Satya
I can only assume something.
E.g.; in customizing You can maintain "OWNID" to be used as part of the "overall" process (please check the links i have shared to you) (but to my knowlegde as "optional". The value used is "wrong" and does not exists etc. We can assume that the next error as shown is a "follow" up error
"Parent object contains errors" => not sure what you have done. Let us assume this:
You have one BOM and tried to get a BOS. To many error can be the reason of this; more details are needed
The "information""data record is locked": can have many meanings
E.g. you "block" the BOM (e.g. use CS02 for same BOM for which you would like to execute BOM BOS transfer)); you "block" the "REAL_SUB" (in CG02 in Edit mode)
Regarding your topic: "i assigned all raw materials" to specification..
I can not judge oin this sentence. But in most cases. we have "FERT" and "HALB" in place. If you assign an material like that to REAL:Sub you will get a "cycle" (material contains it self)
BOM BOS use two options.
1.) either we have one "FERT""/HALB" still assign to REAL_SUB
2.) ro we do not have this situation
If 2.) is true the BOM BOS should generate a "REAL_SUB" (in authroization group as defined in customizing) try to "calculate" (using the BOM items and try to convert to "mass") and at the end e.g. if you have thre "HALBs" as part of the BOM we can assume that either there REAL_Sub are generated (one per HALB) and that these new specs will then be "part" of the composition
I have no clue why you have received teh same error more than once...
Without knowing the detials of the "BOM" to be transferred as "BOS"; the customizing set up you used and the data situation in EHS not that meany help is possible.
C.B.
PS: it is assumed that your user does have all the needed access rights,,,
PPS: it is assumed that you have prepared "full" customizing (of any BOM BOS Step to be done)
Do you use "manual" transfer? I assume this based on what you have showed. This is "better" for the start to get an idea about "error"
Last PPS: I have sens quite "strange" BOMs which one would assume never ever should come up; i can tell you here stories; any "cycle" must be avoided here (e.g. material X conatins material X => this is not allowed in EHS; but sometimes this is set up in BOM (having good reasons)
Realy last PPS: check thread BOM BOS transfer; here error as you have noticed is mentioned "" Error in Parent Object""